mini electric hoist

SNH-MONORAIL HOIST

1. Capacity:0.5-20t

2. Lifting height:3-30m,or customized according to customer request

3. Power supply:220v/380v/400v/415v/440v,50hz/60hz,3phase/single phase

4. Traveling speed:11m/min,21m/min

5. Lifting speed:6.8m/min,5.6m/min,3.4m/min,2.8m/min

1 ton electric chain hoist
2 ton electric chain hoist
hoist 1 ton
electric hoist 2 ton
small electric hoist
electric chain block

Introduction

Monorail hoist is our most frequently ordered hoist in the lower Safe Working Load range between 1 t and 16 t. These hoists tend to be the most economic choice for many standard applications of material flow. The compact design of the type E wire rope hoist offers favourable dimensions. The hoists feature two direct drive cross travel motors. The cross travel trolley is adjustable to suit various flange widths.

Electric hoist application range: used in factories, mines, docks, warehouses, freight yards and other working environments, where the temperature is -20~+40℃, and the relative humidity is not more than 85%. It is forbidden to use it in places full of sulfuric acid or other corrosive gases where there is an explosion hazard, and in places where molten metal, toxic substances, and flammable substances are lifted to ensure safety. When used in severely dusty or open places, protective devices need to be added.

Feature

Advantage

The trolley of the monorail hoist can be combined with the electric chain hoist to form a supporting transportation tool. It can also be used with the chain hoist. It has a wide range of use and is convenient. It can flexibly run the lower flange of the I-beam track for lifting heavy objects. The biggest advantage of a monorail electric hoist is that it can be used on an I-steel track with a certain radius of curvature, so you generally need a monorail trolley to buy an electric hoist according to your use place and field.

Monorail hoist has the characteristics of compact structure, light weight, small size and convenient operation. It can be installed alone on overhead I-beams, or it can be installed on electric or manual single-beam, , cantilever, gantry and other cranes. In fine work situations, when the lifting speed of the CD1 electric hoist cannot meet the requirements, the MD1 two-speed electric hoist should be used. Monorail electric hoist is a classification of electric hoist.

Specification

  • Capacity:
  • 0.5-20t
  • Lifting height:
  • 3-30m,or customized according to customer request
  • Power supply:
  • 220v/380v/400v/415v/440v,50hz/60hz,3phase/single phase
  • Traveling speed:
  • 11m/min,21m/min
  • Lifting speed:
  • 6.8m/min,5.6m/min,3.4m/min,2.8m/min
Success with SEVENCRANE

Get In Touch Now!

    Home

    Tel

    Mail

    Inquiry

    Get In Touch Now!