1. Capacidade de carga: 0,5-50t
2. Altura de elevação: 3-30 m, ou de acordo com a solicitação do cliente
3. Velocidade de deslocamento: 11m/min,21m/min
4. Altura de elevação: 6,8 m/min, 5,6 m/min, 3,4 m/min, 2,8 m/min
5. Fonte de alimentação: 220v/380v/415v/440v/460v,50hz/60hz,3fásico/monofásico
6. Temperatura de trabalho:-20°C-40°C
HHBB-Electric chain hoist with motorized trolley motor is typical of unique optimal structure in shortening the distance between the machine body and the beam tracks, applicable to operations in side low buildings, especially suitable for use in temporarily erected plant buildings or on the sites where expansion of effective hoisting spaces inside the buildings is required the most important parts of the machine is chain and brake system.
1.Shell: Light aluminum alloy shell shall be adopted, which is light but hard ane fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
2.Inverse phase sequence protecting device: It is the special electrical installation which controls the circuit not to work in case of wiring error in power supply.
3.Limit switch: The limit switch device is installed where the weigh is lifted on and off to make the motor to stop automatically so as to prohibit the emergencies from exceeding for safety.
4.24V/36V device: It is used to prohibit the emergencies from occurring in case of the leakage in the switch.
5.Side magnetic braking device: This device shall realize the instant brake in case of the power dump.
6.Chain big: It shall be light, handsome and durable.
7.Chain: The chain shall adopt the imported FEC G80 ultraheat-treatable aluminum alloy chain.
Entre em contato agora!
Português 
English 
Español 
Русский 
Қазақ тілі 
العربية 
Français 
Deutsch 
ไทย 
Bahasa Indonesia 
Bahasa Melayu 
Tiếng Việt 
한국어 
Italiano 
Afrikaans 
Nederlands 
Norsk bokmål 
Български 
עִבְרִית 
Polski 
Čeština 
Hrvatski 
Lietuvių kalba 
Română 
Svenska 
Slovenščina 
Slovenčina 
Türkçe 
Dansk 
Ελληνικά 
فارسی 
Suomi 
简体中文 
